Adding a disk to LVM

Suppose we have already configured LVM, for example, as I described in this article – Setting up and using LVM

Switch to the root user:

sudo -i

If there is no hot-swap drive, turn off the server, connect a new disk, turn on the server and look at the name of the new disk (in my case it’s /dev/sdd):

fdisk -l

Let’s see the existing groups and how much space is left:

vgdisplay

Let’s see a list of physical volumes:

pvdisplay

Let’s start marking a new disk:

fdisk /dev/sdd
n
p
1
Enter
Enter
t
8e
w

Now create a physical volume:

pvcreate /dev/sdd1

Let’s see a list of logical volumes:

lvdisplay

We extend it by adding a new partition (where ixnfo is a volume group):

vgextend ixnfo /dev/sdd1

See the list of physical volumes as follows:

pvscan

Let’s look at the path of the logical volume (in my case /dev/ixnfo/temp) and add a new section:

lvextend /dev/ixnfo/temp /dev/sdd1

Let’s see the size of the mounted logical volume:

df -h

So the size did not change, we’ll fix it with the command:

resize2fs /dev/ixnfo/temp

Done.

Leave a comment

Leave a Reply