Firmware Update Dahua IPC-HFW1320S-W

For the test, I will update the firmware on the IP camera Dahua IPC-HFW1320S-W.

Let’s see what firmware is installed, open the web interface of the device, select the “Setting” tab, on the left the “Information” – “Version” menu.

In my case, the Russian version of the firmware was installed:

System Version 2.400.0001.11.R, Build Date: 2017-04-01
WEB Version 3.2.1.392220
ONVIF Version 2.42

Let’s see a new firmware on the official site and download it
https://www.dahuasecurity.com/products/productDetail/5631

The firmware file is usually in the archive, so unpack it.

In the web interface of the device, open the “Setting” tab, on the left in the “System” menu – “Upgrade”.
Press the “Browse…” button, select the file of the new firmware unpacked from the archive and press the “Upgrade” button to start the update process, which will last about 5 minutes, at this time you can not turn off the power of the device.

I was flashing with the English firmware, after the firmware in the “Information” – “Version” menu, the following was displayed:

System Version 2.400.0000000.16.R, Build Date: 2017-08-31
WEB Version 3.2.1.490211
ONVIF Version 16.12(V2.3.1.458331)