Reset Alcatel OmniStack LS 6224

I will describe examples of resetting the settings on the Alcatel OmniStack LS 6224 in several ways.

1) Connect to the device and execute the command to delete the configuration and restart:

enable
delete startup-config
reload

Just in case, before deleting the configuration, you can make a backup copy to the tftp server or locally:

copy startup-config tftp://10.10.0.18/startup-config 
copy startup-config startup-config-backup
dir

To return it is possible so:

copy tftp://10.10.0.18/startup-config startup-config
copy startup-config-backup startup-config

2) If the password for the switch is unknown, then connect to it with a console cable, the speed is usually 9600.
Turn on the power switch, waiting for the message:

Autoboot in 2 seconds – press RETURN or Esc. to abort and enter prom.

When the message appears – press the “Enter” or “Esc” key, in the resulting menu select “[3] Password Recovery Procedure”, then “[7] Back” and wait for the device to start.

After that, the switch will start and will not ask for the password, just delete the configuration as I wrote above or change the password to the user:

enable
configure
username admin password PASSWORD level 15
exit
copy running-config startup-config
reload

Join the Conversation

1 Comment

Leave a Reply

  1. hello there, i have some issues with the console port so i was wondering if there is a way to hard reset phisically via jumper o something like that.

Discover more from IT Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading