In this article I will give an example of viewing and configuring logs on the Huawei SmartAX MA5683T.
You can view the history of administrator connections to the device, for example via telnet, with the command:
display log security
History of entered user commands (CLI, SNMP commands from U2000 can also be viewed):
display log all
display log cli
display log name
display log name ixnfo
display log snmp all
History of not executed entered commands:
display log failure
View and change memory size for logs:
display log memory
log modify security memory
log modify operating memory
View a specific entry in the logs by its number:
display log index
View settings for sending logs to syslog server:
display syslog
display syslog output
display syslog priority
display syslog source
display loghost list
display loghost list ip
display loghost list name
Examples of adding, activating, deactivating and deleting a syslog server to which logs will be sent:
loghost add 192.168.2.2 test
loghost activate ip 192.168.2.2
loghost activate name test
loghost deactivate ip 192.168.2.2
loghost deactivate name test
loghost delete ip 192.168.2.2
loghost delete name test
Log level (emergency, alert, critical, error, warning, notice, informational, debug):
syslog output all
Activation and deactivation of sending alarm events to a syslog server:
syslog enable alarm-event
syslog disable alarm-event
Synchronization of alarm events to the syslog server:
syslog sync alarm-event
syslog sync alarm-event time start 2019-05-05 12:00:00 end 2019-05-06 12:00:00
See also my article:
Configuring Huawei SmartAX MA5683T