Connect to the switch via telnet and enter the first command to switch to configuration mode:
Continue reading “Configure super VLAN on HP 5800”Tag Archives: IP Unnumbered
Configure IP Unnumbered on Cisco
On the test I will configure IP Unnumbered on Cisco Catalyst 6509E with firmware 12.2(33)SXJ7, on other switches the setup is similar.
IP Unnumbered is useful, for example, when it is necessary to divide a large network into several VLANs and use the same IP addresses and also to issue white IPs in any VLAN using one gateway.
Connect to the terminal device through the console, telnet or SSH.