Let’s say that we configured Huawei SmartAX MA5683T, and also created dba-profile, ont-lineprofile and ont-srvprofile, as I wrote in the article Configuring Huawei SmartAX MA5683T
In this example, I will add ONT (optical network terminal) Huawei EchoLife HG8010 and ZTE ZXA10 F601, as well as many other single-port ONTs.
Let’s start adding a new ONT. First, connect via telnet or console to the Huawei SmartAX MA5683T.
After entering the login and password, we will go into configuration mode:
enable
config
Let’s look at the current configuration to understand under which numbers the ONTs are already added and which service ports are added for them:
display current-configuration
display current-configuration | include service-port
display current-configuration | include 0/5/0 ont 0
Let’s go to the settings menu of the GPON interface:
interface gpon 0/5
Look at what non-registered ONTs are online on port 0 and see their serial number (port numbering starts from 0, not from 1):
display ont autofind 0
Add ONT (if ONT is offline, you can add it in advance knowing SN):
ont add 0 1 sn-auth 48575443ECE02623 omci ont-lineprofile-id 10 ont-srvprofile-id 10 desc "ixnfo.com"
Specify vlan 228 without a tag on the ONT ethernet port:
ont port native-vlan 0 1 eth 1 vlan 228
Exit the settings menu of the GPON interface:
quit
Now to make the Internet work, add service-port for the new ONT:
service-port 2 vlan 228 gpon 0/5/0 ont 1 gemport 1 multi-service user-vlan 228
Save the configuration:
save
You can watch unregistered ONTs at once on all ports with the command:
display ont autofind all
See also my articles:
Adding an ONT with trunk port
How to add EPON ONT on MA5608T
Huawei OLT Bridge ONU