I will describe a few simple steps to perform a hard reset on the Lenovo A660:Continue reading “Hard Reset Lenovo A660”
I will describe a few simple steps to perform a hard reset on the Lenovo S880:Continue reading “Hard reset Lenovo S880”
I will describe a few simple steps to perform a hard reset on the Lenovo P780:Continue reading “Hart reset Lenovo P780”
First, download the latest official firmware.Continue reading “Lenovo A3000 firmware update”
On the test I will use Lenovo A3000-H.
Let’s get started. Turn off the tablet if it is possible, if not, we still press and hold the power key and the volume up key at the same time until the following menu appears:
Press the volume up key to select the desired mode, and go to the volume down key. In our case, let’s move on to Recovery Mode.
There was a robot, we put the power button on and another menu will appear. In it, on the contrary, by the sound reduction button we select the necessary operation, and the magnifications will be performed by it.
First we choose and execute “wipe cache partition“, later “wipe data/factory reset” and at the end we execute “reboot system now“, the device will reboot with standard settings and without user data.
I will describe a few simple steps to perform a hard reset on the Lenovo A390t:
1) Turn off the device if it is turned on.
2) Press the volume button up and the power button simultaneously, wait for the Recovery menu to appear.
3) In the recovery menu, press the volume down/up button to highlight “Wipe data/factory reset” and select it by pressing the power button, then select “Wipe cache partion” in the same way.
4) When cleaning is complete, the recovery menu will appear again, in which we select “reboot system now“, after which the device will reboot.
Today it was necessary to go into the BIOS on the Lenovo IdeaPad 110-15IBR laptop (80T7), but when you press all the keys that are usually used to enter the BIOS, the laptop did not respond and the system continued to boot.
As it turned out, in the BIOS of this Lenovo laptop model, the HotKey Mode function is activated as standard and the functional keys are activated instead of the F1-F12 keys.
Therefore, to enter the BIOS, it is necessary to press two Fn and F2 keys simultaneously, if HotKey Mode is disabled, then simply F2.