By the way, console cable for Huawei and D-Link switches (for example S2326TP, DES-3200) did not approach the Alcatel OmniStack LS 6224, because it does not use the first contact.
When I assembled the working cable according to the scheme, it did not work through the Chinese USB-RS232 adapter, so I had to connect directly to the COM port of the computer.
The standard connection speed is 9600-8-N-1.
The circuit on which I assembled the cable:
1 – white-brown
2 – green
3 – white-green
4 – orange
5 – blue and white-blue
6-4 – jumper
7 – white-orange
8 – brown
Where the digits are RS-232, but I crimped the RJ45 according to the standard)
After connecting to the switch, we will switch to the mode of elevated privileges:
enable
Let’s look at the existing configuration:
show running-config show startup-config
Now go into the configuration mode:
configure
Add the necessary VLANs (207 for my management, 226 for clients):
vlan database vlan 207 vlan 226 exit
We will configure the incoming uplink port as a trunk and specify the necessary VLANs:
interface ethernet g1 switchport mode trunk switchport trunk allowed vlan add 207 switchport trunk allowed vlan add 226 exit
Let’s configure the ports for clients:
interface range ethernet e1-24,g2-4 switchport mode access switchport access vlan 226 exit
The specific port can be configured as follows:
interface ethernet e24 switchport mode access switchport access vlan 226 exit
Assign an IP switch to the VLAN to manage:
interface vlan 207 name core ip address 10.0.20.20 255.255.255.0 exit
Configure authorization (without login by password):
aaa authentication login default line aaa authentication enable default line line console password PASSWORD line telnet password PASSWORD line ssh password PASSWORD exit
If necessary, generate a key and enable the ssh-server:
crypto key generate dsa ip ssh server
If necessary, to authorize via HTTP, add the user (level 15 is the highest):
ip http authentication local username admin password PASSWORD level 15
You can also configure HTTPS:
ip https authentication local username admin password PASSWORD level 15
Generate the certificate and enable HTTPS:
crypto certificate generate key_generate ip https server
Configuring SNMP:
snmp-server community private rw 192.168.0.5 type router exit show snmp
Log setup:
configure logging on logging console errors logging buffered debugging logging file alert exit show logging show logging file clear logging file
Not in configuration mode, we save the configuration:
copy running-config startup-config
See also:
Configuring Loopback Detection on Alcatel OS-LS 6200
Configuring Storm Control on Alcatel OmniStack LS 6224
Hi, could you kindly help me to configure the alcatel ls 6224 from scratch. It is connected in fiber via another ls 6224, but I am not very proficient in the configuration. Thanks