Install and configure ntopng

Below I’ll describe the installation of ntopng in Ubuntu.
We select the necessary package on http://packages.ntop.org/apt-stable/ and download it:

wget wget http://apt-stable.ntop.org/16.04/all/apt-ntop-stable.deb
sudo dpkg -i apt-ntop-stable.deb

Further we carry out:

sudo apt-get clean all
sudo apt-get update
sudo apt-get install pfring nprobe ntopng ntopng-data n2disk nbox
sudo touch /etc/ntopng/ntopng.start
sudo /etc/init.d/ntopng restart

If new versions of ntopng are released, then you can update by running the commands:

sudo apt-get update
sudo apt-get upgrade

After installation, the configuration file will be located in the /etc/ntopng/ntopng.conf directory
I will give an example of its content:

-w=3000
-d=/var/tmp/ntopng
-G=/var/run/ntopng.pid
--httpdocs-dir /usr/share/ntopng/httpdocs
--local-networks="192.168.0.0/16,10.0.0.0/8,172.16.0.0/16"

Restart / stop / start ntopng with commands:

sudo /etc/init.d/ntopng restart
sudo /etc/init.d/ntopng stop
sudo /etc/init.d/ntopng start

You can check from the console with the command:

sudo /etc/init.d/ntopng status
sudo netstat -tulpn | grep :3000

Open the web interface by typing in the address bar of the browser:
http://HOST:3000

The standard login and password are admin/admin.

See also:
Install and configure nprobe
The solution to the error “Missing /etc/ntopng/ntopng.start. Quitting”

Leave a comment

Leave a Reply