SNMP OIDs for BDCOM P3310B

Today wrote a Zabbix template for the BDCOM P3310B so that it was convenient to monitor it and to explore a few necessary OIDs.
To test an OID from a Linux terminal, for example, use the command:

snmpwalk -v2c -c public 192.168.1.5 OID

Actually, I’ll list OID below and describe it.
CPU usage for 1 second:

SNMPv2-SMI::enterprises.3320.9.109.1.1.1.1.3.1

CPU usage for 60 seconds:

SNMPv2-SMI::enterprises.3320.9.109.1.1.1.1.4.1

CPU usage for 5 minutes:

SNMPv2-SMI::enterprises.3320.9.109.1.1.1.1.5.1

Uptime:

SNMPv2-MIB::sysUpTime.0

Description of network interfaces from the configuration (that is, description of the onu):

IF-MIB::ifAlias

MAC addresses on interfaces (ONU):

SNMPv2-SMI::enterprises.3320.101.10.1.1.3

Signal level ONU Rx/Tx (result divide by 10 or multiply by 0.1 in Zabbix):

.1.3.6.1.4.1.3320.9.183.1.1.5
.1.3.6.1.4.1.3320.101.10.5.1.5

Distance to ONU and RTT (TQ):

.1.3.6.1.4.1.3320.101.11.1.1.7
.1.3.6.1.4.1.3320.101.11.1.1.8

SNMP contact information:

SNMPv2-MIB::sysContact.0

SNMP Location:

SNMPv2-MIB::sysLocation.0

If snmpwalk produces an error, then look at the emu article: Installing MIB in Ubuntu and Solving the Error “SNMP Cannot Find Module …”

See also:
SNMP OID and MIB for interfaces

Leave a Reply