Архивы Hardware - Page 29 of 53

D-Link DGS-3612 Firmware Update

On the test I will use the D-Link DGS-3612 switch with firmware 2.84.B48 and Boot PROM: 1.10-B09.
I will update to version 3.00.B42.

PowerBeam 5AC Firmware Update

On the test, I will update the firmware PowerBeam 5AC 500 (with version 7.1.4) and PowerBeam 5AC 620 (with version 7.0.3).

Samsung GT-C3330 Firmware Update

For example, I will update the firmware on the Samsung GT-C3330, the main reason for the update is the password that is installed on it and forgotten.

Connecting and configuring EPS30-4815AF with Huawei MA5600

On the test, I have OLT Huawei SmartAX MA5683T and EPS30-4815AF power supply.
Connect them with a regular twisted pair patchcord with RJ45 connectors.
From the OLT side, we connect the cable to the ESC port on the control board, and on the EPS30-4815AF to RS485.
After this, the OLT will be able to send commands to the EPS30-4815AF.

Adding BDCOM OLT on ABillS

In this article I will give an example of adding BDCOM-P3310C and BDCOM-P3310B to the ABillS billing system on the Ubuntu Server 16.04 operating system.

Configuring Cisco Catalyst 3750

On the test I will configure Cisco Catalyst WS-C3750-48TS-S with firmware 12.2(55)SE3.

Hard reset Lenovo S880

I will describe a few simple steps to perform a hard reset on the Lenovo S880:

Hart reset Lenovo P780

I will describe a few simple steps to perform a hard reset on the Lenovo P780:

Setting up the ZyXEL MES-3528

I will configure for an example the switch ZyXEL MES-3528.
When connected via the console, the standard parameters are as follows:
9600 8N1
Login: admin, password: 1234

List of SNMP OID for FoxGate switches

I’ll write below a few popular SNMP OIDs for FoxGate switches.

CPU usage: