I will give a list of some popular SNMP OID and MIB for the Huawei S2300 series of switches and the like.
I will use Huawei Quidway S2326TP-EI for the test.
Category Archives: Hardware
ZyXEL Debug CLI
I will describe the possible console commands in Debug mode (Debug mode is enabled when ZyXEL devices are turned on).
Continue reading “ZyXEL Debug CLI”Port forwarding on Mikrotik routers
To forward a port on the Mikrotik router, you need to open the “IP” – “Firewall” menu, select the “NAT” tab and add a new rule by clicking “Add new” or “+”.
Continue reading “Port forwarding on Mikrotik routers”Configure Hairpin NAT on RouterOS (Mikrotik)
In this article I will give an example of setting Hairpin NAT on RouterOS (Mikrotik).
I happen to have a server or a DVR in the local network, the ports to which are forwarded in the firewall, but you can connect only from other networks, and from the local network it is obtained only by the local IP address, but not external, on the WAN interface of the router.
Continue reading “Configure Hairpin NAT on RouterOS (Mikrotik)”Configuring Authorized IP on HP 5800
Authorized IP on the HP 5800 switch is used to allow telnet and http to connect to the switch only from specified IP addresses.
Continue reading “Configuring Authorized IP on HP 5800”Backup Ubiquiti Device Configuration (UBNT)
Somehow, our Ubiquiti (UBNT) antennas beat thunderstorms, which then had to be repaired, changed and naturally tuned again. Therefore, I decided to make an automatic copy of the configuration.
Continue reading “Backup Ubiquiti Device Configuration (UBNT)”ASUS RT-N53 Firmware Update
For example, I will update the firmware in the ASUS RT-N53 router with the installed version 1.1.1.1.70.
Continue reading “ASUS RT-N53 Firmware Update”Firmware update ARCHOS 605 WiFi
I will describe the update procedure:
Continue reading “Firmware update ARCHOS 605 WiFi”ASUS RT-N12_VP Firmware Update
For example, I will update ASUS RT-N12_VP with firmware 3.0.0.4.374.880 to 3.0.0.4.376.3835.
Continue reading “ASUS RT-N12_VP Firmware Update”TP-Link TL-WR740N Firmware Update
Before flashing, check the hardware version of the device. Updating the firmware from the wrong version of the device can spoil it!
Also, you can not update the firmware via Wi-Fi and turn off the power of the router during the firmware!