For example, I will update the firmware in the ASUS RT-N53 router with the installed version 1.1.1.1.70.
Continue reading “ASUS RT-N53 Firmware Update”Category Archives: Hardware
Firmware update ARCHOS 605 WiFi
I will describe the update procedure:
Continue reading “Firmware update ARCHOS 605 WiFi”ASUS RT-N12_VP Firmware Update
For example, I will update ASUS RT-N12_VP with firmware 3.0.0.4.374.880 to 3.0.0.4.376.3835.
Continue reading “ASUS RT-N12_VP Firmware Update”TP-Link TL-WR740N Firmware Update
Before flashing, check the hardware version of the device. Updating the firmware from the wrong version of the device can spoil it!
Also, you can not update the firmware via Wi-Fi and turn off the power of the router during the firmware!
View the temperature on the Cisco Catalyst 6500
I will use Cisco Catalyst 6509-E on the test.
To view the temperature of the sensors, connect via the console or telnet for example and execute the command:
FoxGate S6224-S4 Firmware Update
On the test, I will update the firmware on the FoxGate S6224-S4 switch (R5) with version 7.0.3.1 (R0058.0010).
I noticed that on this version of the firmware on the switch, the Vlan management interface often fell off, and the switch performed its functions, but was unavailable.
Configuring ports on Huawei switches
I will give an example of setting up ports on Huawei switches. For the test, I will execute commands on the Huawei Quidway S2326TP-EI.
Continue reading “Configuring ports on Huawei switches”How to enable Compliance Test on UBNT devices
It was necessary to somehow put the frequency on the AirMAX PowerBeam M5 with firmware 5.6.2 under license, but alas, it is not on the list! The country is chosen Ukraine, after updating the firmware to the newest 5.6.3 frequencies did not appear, they cannot be chosen, although state sells them!
UPD: I note that in the new firmware versions the “Compliance Test” has been renamed to “Licensed”.
Continue reading “How to enable Compliance Test on UBNT devices”NanoStation M2 Firmware Update
Once I updated the Nano Station M2 with firmware 5.5.6 to 5.6.5.
Version 5.6.5 did not immediately become, as there was not enough memory in the device for downloading it, so I first had to upgrade to 5.6.2, and then 5.6.5.
Smart Array P420i Firmware Update
For the test, I will update the Smart Array P420i firmware on the HPE DL380p G8 server.
Continue reading “Smart Array P420i Firmware Update”