I will give an example of setting up DHCP Snooping on MikroTik (RouterOS) to block third-party DHCP servers:
Continue reading “Configuring DHCP Snooping on MikroTik”Category Archives: Hardware
Firmware Update LG X135 L60
I will describe an example of the firmware LG X135 L60 through the program SP Flash Tool:
Continue reading “Firmware Update LG X135 L60”Installing Windows on Dell Latitude 10
I will describe the process of installing Windows on a Dell Latitude 10 tablet:
Continue reading “Installing Windows on Dell Latitude 10”List of network and network equipment emulators
I will give a short list of popular network emulators and network equipment:
Continue reading “List of network and network equipment emulators”How to configure SSH on Cisco
In this article I will write how to configure SSH on Cisco.
Connect to the device via telnet or console cable and switch to the privileged mode:
Continue reading “How to configure SSH on Cisco”D-Link DES-3828 firmware update
On the test, I will update the firmware of the D-Link DES-3828 switch with version 4.50.B23 to 4.61.B35 (firmware without WEB).
Continue reading “D-Link DES-3828 firmware update”D-Link DGS-3612 Firmware Update
On the test I will use the D-Link DGS-3612 switch with firmware 2.84.B48 and Boot PROM: 1.10-B09.
I will update to version 3.00.B42.
PowerBeam 5AC Firmware Update
On the test, I will update the firmware PowerBeam 5AC 500 (with version 7.1.4) and PowerBeam 5AC 620 (with version 7.0.3).
Continue reading “PowerBeam 5AC Firmware Update”Samsung GT-C3330 Firmware Update
For example, I will update the firmware on the Samsung GT-C3330, the main reason for the update is the password that is installed on it and forgotten.
Continue reading “Samsung GT-C3330 Firmware Update”Connecting and configuring EPS30-4815AF with Huawei MA5600
On the test, I have OLT Huawei SmartAX MA5683T and EPS30-4815AF power supply.
Connect them with a regular twisted pair patchcord with RJ45 connectors.
From the OLT side, we connect the cable to the ESC port on the control board, and on the EPS30-4815AF to RS485.
After this, the OLT will be able to send commands to the EPS30-4815AF.