Default login: root, password: admin.
Continue reading “Configuring Huawei SmartAX MA5683T”
BIOS may contain: huawei123, admin123, Huawei@123.
Default IP: 10.11.104.2
Standard data for a console port connection: Baud rate 9600, 8 bits, stop bits 1, no flow control, VT100/auto.
For example, I will configure the Huawei MA5608T.
Continue reading “Configuring Huawei MA5608T”
Configured the next EPON OLT BDCOM P3310B-2AC and P3310C-2AC.
Continue reading “How to configure BDCOM P3310”
Configured today GPON ONT Huawei EchoLife HG8245C to OLT and it was necessary to go to its web interface to change the password on Wi-Fi, and the standard root login and password admin did not fit. I had to perform several manipulations.
Of course, to begin with, connect to any of the LAN ports, wait until the DHCP ONT is turned on, it will give out IP, such as 192.168.1.2 or set it manually.
Connect via telnet to ONT IP 192.168.1.1, enter login root and password admin.
Then type the following commands one at a time:
grep admin myconfig.xml
As a result, the last command gives information about what is happening in the web interface:
Passwords can also be written on the device label. In the settings you can change the password, in this case the user will be useradmin and the specified password.
For HG8245, the standard administrative login and password telecomadmin \ admintelecom, for users – admin/admin. For Chinese HG8245C standard – telecomadmin \ nE7jA%5m.
There may be further passwords for telecomadmin:
See also: Create profile on Huawei SmartAX MA56XX for Huawei Echolife Hg8245