Default login: root, password: admin.
Continue reading “Configuring Huawei SmartAX MA5683T”
BIOS may contain: huawei123, admin123, Huawei@123.
Default IP: 10.11.104.2
Standard data for a console port connection: Baud rate 9600, 8 bits, stop bits 1, no flow control, VT100/auto.
On the test, I have OLT Huawei SmartAX MA5683T and EPS30-4815AF.
Continue reading “Connecting and configuring EPS30-4815AF with Huawei MA5600”
Connect them with a regular twisted pair patchcord with RJ45 connectors.
From the OLT side, we connect the cable to the ESC port on the control board, and on the EPS30-4815AF to RS485.
After this, the OLT will be able to send commands to the EPS30-4815AF.
Decoded from the firmware Huawei SmartAX MA5683T several OID.
Continue reading “OID and MIB for Huawei OLT and ONU”
On the test I’ll take the H805GPFD board with 16 GPON ports and install it in OLT Huawei SmartAX MA5683T without shutting it down.
Continue reading “Install GPON card in Huawei OLT”
After inserting on the board, the RUN / ALM indicator flashed red and literally a minute later green.