” number of arp entries above this value will never be deleted” Can you please explain this sentence? For me…
thank you.. Varry varry much
Thank you Sir!
sudo: ulimit: command not found and even: sudo: unlimit: command not found
Most likely Zabbix is not running as root https://ixnfo.com/en/how-to-run-zabbix-agent-as-root.html
I just found your work here. I am trying to implement it on Zabbix 6.4 with Agent2. I am getting…
Hola, fíjate si haces snmpwalk -v2c -c public 172.16.0.2 1.3.6.1.4.1.2011.6.128.1.1.2.51.1.4, te entregará una lista de todas las ONT y sus…
amazing, bios update works like a charm Спасибо
Thanks! A very important addition. Solved my issue.
Hello, can you please share the Zabbix template you use for this? We have the DSE 7410 MKII and I…
If those three keys do not fix the problem, you may have to put HOST instead of IP. They would…
Hi, there are no such commands that you specified nex3064(config-if)# interface ethernet 1/1 nex3064(config-if)# switchport ? host Set port host…
you opened the template ? how and where ? and why has not such a template by default the proper…
all ok, thank you !
Thanks!!! Finally solved my issues with wan/lan connectivity between two nanobridge m5 devices.
I just can’t tick “Additional Options: Enable PAE/NX“
No, its just redundant to change directory in this case
The lack of proper route aggregation management in BIRD, as well as the lack of complete protocol implementation for other…
i have tplink tlwr820n and v2 firmware , but for lan and wifi to stb android tvbox cannot multicast traffic…
Thanks for the step by step guide
OID para validar trafico (bit/s) de ONUs
2023 03 09 Už neplatí, hesla nejsou vidět.
Starting with MySQL 8 you no longer can (implicitly) create a user using the GRANT command. Use CREATE USER instead,…
As for the date, it’s fine to set the page update visible only. Remove the date if you are writing…
On the EPMU03 monitoring module, it is necessary to set the DIP switches correctly
hi, is this something that Unifi AP Lite can do? I’d like my wifi setup to blend in with the…
Thanks so much Vyacheslav Gapon, was cracking my head on how to address this issue.
Thank you so much, I really hope your day is going well! You’ve helped me out with this.
Thanks – much better HowTo than a 30 min video with 0 bytes of useful information
See https://ixnfo.com/en/configuring-remote-access-in-mikrotik-router.html
I tried to read all your articles about Zabbix and Mikrotik routers but I’ve not found yet the correct configuration…
The README says: Verify that your switches are running the correct boot loader with the ‘show version’ command. Once displayed,…
zip password is missing in readme file. Can you please give the password?
Thank you for your blog, but what if for multiple domains? Do you have any articles that can be read?…
a missing space after the # in /etc/apparmor.d/usr.sbin.mysqld # Site-specific additions and overrides. See local/README for details. #include make the…
Thanks bud
fine
sorry I don’t have
Amazing info thank you, is there anywhere we could fine these firmware files?
i was wrong, i have to “eat crow”,becuase, IF YOU FAIL TO FOLLOW THE DIRECTIONS EXACTLY then of course comms…
just a word of caution. today(june2022) tried this on up-to-date locom5= this will make eth comms immediatly and premanently stop…
whew the file download?
Great info!!! thanks!! it works like a charm after hours trying with cu stty and other alternatives! thanks for the…
Thanks man, very useful!
Thanks ;-)
Hello every one I tried this tutorial and it was vey helpful
You must change config prefix for: full_audit:prefix = %I , where %I – IP-address
Good one
Easier for me was voicemail.conf to create a mailbox for the other person I want to receive the voicemail. Then…
nice I did not know it was possible to update directly though ILO. good tip. now if only I could…