Category Archives: Huawei

Configuring Huawei Quidway S2326TP-EI

The settings are essentially suitable for the entire Huawei Quidway S2300 series, but noticed that some commands may have small differences depending on the firmware version. If something does not work out, then you can look at the options for the commands by typing a question mark through a space after any command.

Continue reading “Configuring Huawei Quidway S2326TP-EI”

Adding ONT TP-LINK TL-GP110 on Huawei SmartAX MA5683T

Suppose we went into the ONT TP-LINK TL-GP110 web interface (standard IP 192.168.1.1, admin username without password) and specified transit mode in the VLAN settings, and also disabled DHCP.
Huawei SmartAX MA5683T set up and added lineprofile/srvprofile onu profiles according to my instructions: Configuring Huawei SmartAX MA5683T

Continue reading “Adding ONT TP-LINK TL-GP110 on Huawei SmartAX MA5683T”

Adding ONT Huawei EchoLife HG8010 to Huawei SmartAX MA5683T

Suppose you configured OLT as I wrote in this article Configuring the Huawei SmartAX MA5683T through the console.
Now connect via telnet or console to the Huawei SmartAX MA5683T.
After entering the login and password, we will go into configuration mode by typing the command:

Continue reading “Adding ONT Huawei EchoLife HG8010 to Huawei SmartAX MA5683T”

Connecting and configuring EPS30-4815AF with Huawei MA5600

On the test, I have OLT Huawei SmartAX MA5683T and EPS30-4815AF power supply.
Connect them with a regular twisted pair patchcord with RJ45 connectors.
From the OLT side, we connect the cable to the ESC port on the control board, and on the EPS30-4815AF to RS485.
After this, the OLT will be able to send commands to the EPS30-4815AF.

Continue reading “Connecting and configuring EPS30-4815AF with Huawei MA5600”