Архивы Hardware - Page 18 of 53

How to reset Allied Telesis AT-8000S

To reset the settings on the Allied Telesis AT-8000S switch, it is enough to connect to it via SSH or an ordinary console null-modem RS-232 cable at a speed of 115200.

Adding ONT on Huawei SmartAX MA5600

Let’s say that we configured Huawei SmartAX MA5683T, and also created dba-profile, ont-lineprofile and ont-srvprofile, as I wrote in the article Configuring Huawei SmartAX MA5683T

List and Description of DR Debug Codes for ASRock Motherboards

I will briefly list and describe some codes:

Rafale Digital Cable Receiver Firmware Update

As an example, I took the model Rafale C-0418.

Configuring Allied Telesis AT-8000S

For example, I’ll configure the Allied Telesis AT-8000S/24 switch.

Configuring PIM on D-Link Switches

I use the D-Link DGS-3612G switch as an example.

Setup Mikrotik as a Wi-Fi repeater

On the test I will use two Mikrotik RB951Ui-2HnD routers.

D-Link DWL-2100AP Firmware Update

First, go to the web interface of the access point and look at the “Status” tab of the firmware version.
The default login is admin without a password.

H3C CLI

I will give examples of some commands for H3C switches.

Adding ONT ZTE F660 on Huawei SmartAX MA5683T

First of all, configure ONT. We will connect to it through any of the LAN ports, in the browser we will type the address 192.168.1.1 and enter the login and password.
The standard login is admin, the password is admin.
With elevated privileges, login is mgts, password is mtsoao.
The most basic thing is to create a WAN connection with the necessary parameters, in which we indicate the VLAN number, I will use 228.