Sometimes some necessary processes use a lot of resources on the server and the system often starts to notify about it by email.
For example, as in my case, after installing the Zabbix agent, notifications began to come:
How to solve “LFD: Excessive resource usage”
Somehow I noticed errors coming to the mail from cPanel:
Continue reading “How to solve “LFD: Excessive resource usage””How to save photo from Instagram
Here are a few options for saving photos from Instagram.
Continue reading “How to save photo from Instagram”Sending e-mail in Windows via the mailsend console utility
Once I started using the mailsend program to automatically send reports via SMTP, since mailsend supports SSL. Before that I used Blat.
Continue reading “Sending e-mail in Windows via the mailsend console utility”Solving the problem with freezing DIR-300/NRU/B7 using firmware from Zyxel Keenetic Lite
I noticed on more than 10 DIR-300/NRU/B7 routers that they hang periodically, the Internet disappears, and if the router is included in an unmanaged switch, then the DIR-300/NRU/B7 also hangs it. All official firmware up to 1.4.8 did not solve the problem.
It was possible to solve the problem only with modified firmware from Zyxel Keenetic Lite.
Continue reading “Solving the problem with freezing DIR-300/NRU/B7 using firmware from Zyxel Keenetic Lite”Configuring the D-Link DIR-300NRU/B7 Router
As an example, we will take the D-Link DIR-300 NRUB7 router.
Continue reading “Configuring the D-Link DIR-300NRU/B7 Router”Restoring D-Link DIR-300NRU/B7 Router
I had to restore the D-Link DIR-300NRU/B7 on the inoperative router, which stopped working after turning off the power at the time of the firmware update. In fact, some other D-Link routers can be restored using the method.
Continue reading “Restoring D-Link DIR-300NRU/B7 Router”D-Link DIR-300 Firmware Update
In the test I will update the firmware of the D-Link DIR-300 B5 v.1.2.94 router to 2.15.12.
In my case, after updating the firmware, the settings were reset to the factory settings and new functions were added, for example, when you select a Wi-Fi channel, you can see the noise levels of channels by other devices.
ACL Examples for D-Link Switches
In this article I will give some examples of blocking IP addresses, MAC addresses, DHCP packets from DHCP servers, etc.
Continue reading “ACL Examples for D-Link Switches”Configuring Zabbix SNMP Traps
Suppose we configured snmp according to my instructions:
Configuring SNMP Traps on Linux
Now change the configuration file /etc/snmp/snmptt.conf.